Table of Contents
Advertisement
The compact design of the FT-223 transceiver makes it ideal
for mobile installation, operating directly from the vehicle
'
s
12 Volt battery.
For base station use, an accessory model
,
FP-2 Two-Way Power Supply, provides operating voltage
plus a large external speaker.
SPECIFICATIONS
GENERAL
Frequency Coverage
Number of Channels
Speaker
Microphone
Power Requirement
Current Consumption
Metering
Dimensions
Weight
TRANSMITTER
RF Output
Frequency Stability
Crystal Multiplication
Modulation
Deviation
-
4
-
144 to 146 MHz or 146 to 148 MHz
23 (3 channels supplied)
an optional external VFO can be used
Internal 3
11
dynamic speaker with
provision for connecting external
4 ohm dynamic speaker
Dynamic push-to-talk microphone
with retractable coiled cord
13. 5 Volts DC, +10%
0. 45 Amp receive
1. 2
Amp transmit (LOW)
2. 3
Amp transmit (HI)
Illuminated front panel meter
indicates relative received signal
strength and transmitter power
output
180 (W) x 60 (H) x 220 (D) mm
2. 5 Kg
10 Watts (HI) or 1 Watt (LOW)
into 50 ohm load at 13. 5 Volts DC
+0.002%
12 times
F3 (phase modulation)
Up to ±_10 kHz (factory adjusted at
+5 kHz)
Advertisement
Table of Contents
