To Copy Using Cover Mode - Konica Minolta bizhub 500 User Manual

5

To copy using Cover Mode

0 Load the original in the ADF. If the number of original sheets exceeds 80,
use Separate Scan mode. For details, see "Separate Scan Setting" on
page 3-58.
0 With Separate Scan mode selected, the original glass can also be used
to scan the original.
0 Trays for copy paper and front/back covers should have the same paper
size loaded in the same orientation.
0 Tray 1 is initially specified as the source of both front and back covers.
When loading covers into another tray, select that tray on the Cover Pa-
per Screen.
The initial setting can be changed in the administrator setting. For details,
see page 15-102.
0 The front and back covers can be fed from different tray source for each.
0 When using thick paper for covers, load it into the bypass tray, then make
paper setting for bypass tray.
0 Insertion sheets can also be added to the copied set. For details, see
"Adding Insertions (Insert Sheet)" on page 5-12.
1
Load the original.
2
Enter the desired print quantity from the control panel keypad.
3
Load cover paper into any tray.
– Load cover paper of the same size as document paper into any
tray, except the tray loaded with document paper. Paper type can
be different between front and back covers.
– When using thick paper for covers, load it into the bypass tray, then
specify the paper type as Thick in paper setting for bypass tray. For
details, see "To specify paper type" on page 3-27.
4
Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
5-8
Application Functions
bizhub 500/420