Konica Minolta bizhub 500 User Manual page 548

Utility <Administrator Setting>
3
Specify the on/off times.
– Touch the key for the desired day to highlight it, then use the control
panel keypad to enter a two-digit ON hour in terms of the 24-hour
clock. (e.g. 14 for 2 p.m.)
Use the right arrow key to move the cursor to ON minute, then enter
the desired ON minute. (e.g. 07 for 7 min.)
Similarly enter the OFF hour and OFF minute.
– If wrong number is entered, touch [Clear] to delete it, then enter the
correct number.
Press [C] (Clear) on the control panel to delete both ON and OFF
time of the selected day of the week.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
5
If further changes are required, touch the desired key.
bizhub 500/420
15
15-35