To Select A Stored Magnification Ratio - Konica Minolta bizhub 500 User Manual

3
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Basic
Screen.

To select a stored magnification ratio

Follow the procedure below to recall the stored magnification ratio.
0 The factory default provides three types (×4.000, ×2.000, ×0.500) of the
proportional zoom ratio.
0 The stored ratio can be altered. For details, see "To store a zoom ratio"
on page 3-41.
0 Use the [+] and [–] keys on the Zoom Screen to make a fine adjustment
on the recalled magnification ratio. Touch [+] to increase, or [–] to de-
crease the ratio in 0.001 increments.
1
Touch [Zoom] on the Basic Screen.
The Zoom Screen will be displayed.
2
Touch the desired Set Zoom key to highlight it.
3-40
Basic Copy Operations
bizhub 500/420