Increase Priority For Printing An Active Job In Current Jobs - Konica Minolta bizhub 500 User Manual

Job Management (Job List)
4
Check the contents of the job being selected, and then touch [Yes].
The Current Jobs list whose job being deleted appears again.
How to stop from deleting the job?
?
% Touch [No] in the message screen. The Current Jobs list which is
not changed will be restored.
5
Close the Job List Screen.
– To return to the screen that was displayed before [Job List] was
touched, touch [Exit], or press [Reset] from the control panel.
8.2.4

Increase Priority for Printing an Active Job in Current Jobs

The next job to be printed after the current job being printed can be selected.
Procedure
0 If an Administrator mode function was set so that the output priority of
jobs cannot be changed, [Increase Priority] does not appear and the out-
put priority of the jobs cannot be specified. For details, refer to
page 15-45.
0 If the output priority of jobs is set when the job which can be interrupted
is printed, printing is interrupted and printing of the job given priority be-
gins.
Printing of the interrupted job is automatically restarted once printing for
the job given priority is finished.
0 When copying a job by interrupt or printing a job by the output priority,
another job cannot be copied by interrupt.If the output priority of jobs is
set when the job which cannot be interrupted is printed, printing begins
after the current printing completes.
1
Touch [Job List] on the touch screen.
– When the current list of jobs using the Print functions is not dis-
played, touch [Print] tab.
The current list of jobs using the Print functions is displayed.
bizhub 500/420
8
8-17