Konica Minolta bizhub 500 User Manual page 232

Application Functions
12
Press [Start] on the control panel.
– When scanning multiple originals, be sure to start with the first page
and repeat steps 11 and 12 for all the originals in page order.
13
Touch [Finish].
14
Press [Start] on the control panel.
The machine will start printing when ready for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Basic
Screen.
bizhub 500/420
5
5-23