To Copy Using Insert Sheet - Konica Minolta bizhub 500 User Manual

5

To copy using Insert Sheet

0 Load the original in the ADF. If the number of original sheets exceeds 80,
use Separate Scan mode. For details, see "Separate Scan Setting" on
page 3-58.
0 With Separate Scan mode selected, the original glass can also be used
to scan the original.
0 Trays for copy paper and insertions should have the same paper size
loaded in the same orientation.
0 Tray 1 is initially specified as the insertion tray source. When loading in-
sertions into another tray, select that tray on the Insert Paper Screen.
The initial setting can be changed in the administrator setting. For details,
see page 15-102.
The tray source cannot be specified individually for each insertion loca-
tion.
0 Up to 30 insertion locations can be specified for the original from 1 to 999
pages.
0 Covers can also be attached. For details, see "Adding Covers (Cover
Mode)" on page 5-7.
The front and back covers can be fed from different tray source for each.
1
Load the original.
2
Enter the desired print quantity from the control panel keypad.
3
Select the Simplex/Duplex mode.
– For details on specifying Simplex/Duplex mode, see "Simplex/Du-
plex Setting" on page 3-46.
4
Load paper for insertions into the desired tray.
– The bypass tray is also available as insertion tray source.
5-14
Application Functions
bizhub 500/420