Delete Active And Held Jobs In Current Jobs - Konica Minolta bizhub 500 User Manual

8
8.2.3

Delete Active and Held Jobs in Current Jobs

Active jobs or jobs being held can be deleted from the Current Jobs list.
Procedure
0 If user authentication settings have been applied and the machine is set
so that jobs cannot be deleted by other users, the job is not deleted. For
details, refer to page 15-45.
1
Touch [Job List] on the touch screen.
– When the current list of jobs using the Print functions is not dis-
played, touch the [Print] tab.
The current list of jobs using the Print functions will be displayed.
2
Select the type of jobs to be deleted from the Current Jobs lists.
– To check the jobs that have been held, touch [Held Jobs].
The current list of jobs that have been selected will be displayed.
3
Select the job to be deleted, and then touch [Delete].
– Touch [ ] or [ ] to scroll the job keys, and search the job to be
checked.
Touch the desired job key, and then touch [Check Job].
A message requesting confirmation to delete the job appears.
What to do if an incorrect job key was selected?
?
% Select a correct job key, or touch the key for the selected job again
to deselect it.
% A job can also be deleted after checking details of that job. See
page 8-11.
8-16
Job Management (Job List)
bizhub 500/420