Konica Minolta bizhub 500 User Manual page 336

Finishing/Folding
0 Some copy conditions are incompatible with Group mode. For details,
see "Copy Conditions Incompatible with Finishing/Folding" on
page 6-26.
0 If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the crosswise orientation
v in one paper tray and with the lengthwise orientation w in other tray.
"Auto Paper Select" setting is selected.
The "Auto Zoom" setting is used when the Mixed Original setting is se-
lected.
0 The tray 1 (lower tray) capacity is max. 250 sheets, and tray 2 (upper tray)
capacity is max. 100 sheets. If a copy run of more than those limits is re-
quired, be sure to remove the copies from the tray before the maximum
capacity is reached.
1
Position the original to be copied.
2
Using the keypad, enter the desired number of copies.
3
Load the desired copy paper size in a tray.
– When using an alternating crisscross pattern, load 8-1/2 × 11- or 5-
1/2 × 8-1/2-size paper in crosswise orientation v into one paper
tray and in the lengthwise orientation w into other tray.
4
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
bizhub 500/420
6
6-23