Utility <Administrator Setting>
3
To enable this function, touch [ON] to highlight it.
–
Touch [Power Save Start Time] to highlight it, then enter the start
time using the control panel keypad.
–
Similarly, touch [Power Save End Time] to highlight it, then enter the
end time using the control panel keypad.
–
With [OFF] selected, this function will be disabled.
4
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
5
If further changes are required, touch the desired key.
bizhub 500/420
15
15-39