Reset Setting > 3 Job Reset; To Specify Job Reset - Konica Minolta bizhub 500 User Manual

Hide thumbs Also See for bizhub 500:

Table of Contents

14.2.10 4 Reset Setting > 3 Job Reset

Select whether or not to initialize the settings currently specified when the

machine takes it that the user has changed or original document is loaded

into the ADF.

Also, select the copy condition to be initialized each time a single job has

been completed. The following settings are provided.

Staple Setting: Initializes specified conditions in Staple mode.

Original Set Bind Direction: Initializes specified conditions in Original Direc-

tion and Margin.

Reset Data After Job: Initializes all copy conditions specified for the complet-

This machine considers the following cases as user change (When Ac-

count is Changed):

- When the optional key counter or magnetic card of the data controller

- When [Access] is pressed after the User Authentication/ Account Track

setting has once been performed.

Press the [Utility/Counter] to display the Utility/Counter Screen.

Touch [2 User Setting] to display the User Setting Screen.

Touch [1 System Setting].

The System Setting Screen will be displayed.

Utility <User Setting>

bizhub 500/420

Troubleshooting