Konica Minolta bizhub 500 User Manual page 530

Utility <Administrator Setting>
Setting Item/Description
7 Expert Adjustment
1 Original Image Density
Specify the original image type and adjust the densi-
ty.
• Function: Copy/Fax
• Original Type: Text/Photo/Text Photo/Dot Matrix
• Density Adjustment
2 Erase Adjustment
Specify the conditions in operating the Non Image
Area Erase function, and also specify the erase
amount of the ADF Frame Erase function.
3 Finisher Adjustment
8 List/Counter
1 Management List
Print out the machine management lists.
2 Paper Size/Type Counter
Register up to nine combinations of paper size and
type to be counted.
bizhub 500/420
Text/Photo: 0 (Light) ~ 5 (Dark): 3
Text: 0 (Light) ~ 5 (Dark): 3
Photo: 0 (Light) ~ 5 (Dark): 1
Dot Matrix: 0 (Light) ~ 5 (Dark): 2
Non Image Area Erase: Always/Only when Auto
Size or ×1.0 is selected/Do Not Erase when ×1.0
is selected
Non Image Area Erase Setting: Auto/Specify
• How to Erase: Diagonal Erase/Square Erase
• Original Density: 1 (Light) ~ (Dark)
ADF Frame Erase: 0 to 5 mm in 1 mm incre-
ments
1 Center Staple Position
Adjust the dislocation of the center staple posi-
tion on each paper size.
-5.0 to 5.0 mm in 0.5 mm increments
2 Half-Fold Position
Adjust the dislocation of half-fold position on
each paper size.
-5.0 to 5.0 mm in 0.5 mm increments
3 Punch Horizontal Position
Adjust the horizontal position of punch holes.
-5.0 to 5.0 mm in 0.5 mm increments
4 Punch Resist Loop Size
Adjust the slanted punch position in double-sid-
ed copies or in cover sheet.
-4 to 4 mm in 1 mm increments
15
Default
• Function: Copy
• Original Type: Text/Photo
• Density Adjustment
Text/Photo: 3
Text: 3
Photo: 1
Dot Matrix: 2
Do Not Erase when ×1.0 is
selected
Specify
• How to Erase: Square
Erase
• Original Density: 3 (Std.)
3 mm
0.0 mm
0.0 mm
0.0 mm
0 mm
- - -
- - -
15-17