Konica Minolta bizhub 500 User Manual page 272

Application Functions
? What if the value just entered is out of available range?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
Is it available to change the binding position even if the margin is
?
already specified?
% Yes. The binding position can be changed at any time.
7
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Page Margin Screen to cancel the setting
change.
8
Select additional copy conditions, as desired.
9
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.
bizhub 500/420
5
5-63