Positioning Original On The Original Glass - Konica Minolta bizhub 500 User Manual

9

Positioning Original on the Original Glass

Use the original glass when originals are not suitable for use with the ADF, or
when setting copying conditions incompatible with the ADF.
The machine will detect the original size automatically when the original is
positioned on the original glass with ADF closed, then select an appropriate
paper size automatically by Auto Paper Select function.
Item
Original type
Original Size
Auto Original Size Detect
Maximum original weight
Maximum original thickness
Observe the following precautions when placing the original on the original
glass.
- The size of original printed on paper in inch sizes (such as A3, B4, A4)
cannot be automatically detected. The setting must be specified by the
service representative. For details, contact the service representative.
- If a custom-sized original is positioned, the "Auto Paper Select" and "Au-
to Zoom" settings cannot be used since the original size cannot be de-
tected automatically. If a custom-sized original is positioned, select the
size of the paper to be copied.
- If highly translucent or transparent original, such as overhead transpar-
encies or trace paper, are positioned, the original size cannot be detected
automatically. Place a blank sheet of paper of the same size over the orig-
inal.
- Do not place objects exceeding 15 lb on the original glass, otherwise the
original glass may be damaged.
- If a book is placed on the original glass, do not press it down extremely
hard, otherwise the original glass may be damaged.
9-14
Paper and Original Information
Description
Sheets, books (spreads), three-dimensional objects
128 mm × 139.7 mm to 297 mm × 431.8 mm
11 × 17 w, 8-1/2 × 14 w, 8-1/2 × 11 w/v, 5-1/2 × 8-1/2 w/v,
A3 w, B4 w, A4 w/v, B5 w/v
15 lb
30 mm
bizhub 500/420