9
To copy using the "Cover Mode" function
0 The "Cover Mode" function can be used only if the ADF is installed.
1
Load the document into the ADF.
–
For details on positioning the document, refer to "Feeding the
document" on page 4-9.
–
If the document contains more than 80 pages, refer to "Scanning a
document in separate batches ("Separate Scan" setting)" on
page 4-13.
2
Load the paper for the cover pages and the paper for the main body of
the document into separate paper trays.
–
Use paper with the same size for the cover pages and for the main
body of the document, and load them in the same orientation.
3
Touch [Application], and then touch
[Cover Mode].
–
For details on loading paper
when using thick paper for the
cover pages, refer to "Paper
types and paper capacities" on
page 8-5 and "Loading paper
into the bypass tray" on
page 3-58.
The Cover Mode screen appears.
4
Select the desired cover page
settings.
–
To cancel the "Cover Mode"
function, touch [OFF].
5
Touch the button under "Cover Paper".
The Cover Paper screen appears.
9-4
Application functions
bizhub 362/282/222