Konica Minolta bizhub 500 User Manual page 265

5
5
Specify the binding position of the booklet.
– Touch [Left Bind] or [Right Bind] to highlight it.
6
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Booklet Screen to cancel the setting change.
– An appropriate paper size corresponding to the original size and
recommended magnification ratio is automatically specified.
If the corresponding paper size is not loaded in any tray, a message
will prompt you to load the specified size.
7
Select additional copy conditions, as desired.
– To make a folded booklet of the same size as the original size, man-
ually select the paper size twice the original size. In this case, the
recommended magnification ratio of ×0.647 will be changed to
×1.000 automatically.
– Simplex/Duplex setting is automatically specified as 1%2. If the
double-sided original is loaded in the ADF, touch [Simplex/Duplex]
to select 2%2 mode on the Simplex/Duplex Screen.
8
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
5-56
Application Functions
bizhub 500/420