Konica Minolta bizhub 500 User Manual page 392

Job Management (Job List)
3
Select a job to be checked, and then touch [Detail].
– Touch [ ] or [ ] to scroll the job keys, and search the job to be
checked.
Touch the desired job key, and then touch [Check Job].
The Check Job Details Screen of the selected job is displayed.
What to do if an incorrect job key was selected?
?
% Select a correct job key, or touch the key for the selected job again
to deselect it.
4
Check the contents of the Check Job Details screen.
– The number to the left of [
rently displayed screen/the total number of screens.
– Touch [
– The screen below is a sample.The contents and number of Check
Job Details Screens differ depending on the job that was selected.
5
Close the Check Job Details screen.
– To return to Current Jobs, touch [Close].
– To return to the screen that was displayed before [Job List] was
touched, touch [Exit], or press [Reset] from the control panel.
bizhub 500/420
Back] indicates the number of the cur-
Back] or [Fwd. ] to switch Check Job Details Screens.
8
8-15