Automatically Conserving Energy (Low Power Mode); To Interrupt The Low Power Mode To Activate The Machine - Konica Minolta bizhub 500 User Manual

2

Automatically Conserving Energy (Low Power Mode)

If no operation is performed for a specified length of time, the touch panel
goes off and the energy consumption is reduced to under approx. 105 W.
The [Power Save] key and the main power indicator light up in green, the
[Start] key lights up in red, and the touch panel and all the other indicators go
off.
This is the Low Power mode.
The machine can receive jobs even when it is in the Low Power mode.
As the factory default, the machine enters the low power mode after 15 min-
utes (bizhub 500) and 1 minute (bizhub 420).

To interrupt the low power mode to activate the machine

1
Press [Power Save] on the control panel.
– Pressing any key or
the surface of the
touch panel also re-
turns the machine to
an operational state.
The touch panel display reappears and, after the machine has finished
warming up, it is ready to operate again.
2-32
Before Making Copies
bizhub 500/420