Konica Minolta bizhub 500 User Manual page 149

3
? What should be done if the message "Input Error" is displayed and
entered size is ignored?
The value just entered is out of available range.
% Press [C] (Clear) on the control panel, then reenter the correct value.
4
Touch [OK].
– Touching [Cancel] will clear the magnification ratio entered on the
XY Zoom Screen.
The Zoom Screen will be restored.
5
Touch [OK].
The Basic Screen will be restored with the specified magnification ratio
displayed on the Zoom key.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Basic
Screen.
3-36
Basic Copy Operations
bizhub 500/420