Konica Minolta bizhub 500 User Manual page 251

5
8
Specify the desired Scan Range mode.
– To detect the original size automatically, touch [Auto Detect].
Non-Image Area Erase will also be selected automatically.
– To specify the scanning area, touch [Set Range] to display the
Standard Size Screen, then select the desired scanning area.
Use up/down arrow key to scroll to the desired size, if necessary.
– To enter the dimensions of scanning area, touch [Custom Size] on
the Standard Size Screen to display the Custom Size Screen, then
enter the desired dimensions from the control panel keypad. In or-
der to specify a fraction, touch the bidirectional arrow key to move
the cursor, then use [+] and [–] to enter the desired value in 1/16 in.
increments.
Do you want to delete the dimensions once entered?
?
% Press [C] (Clear) on the control panel, then enter the correct dimen-
sions.
5-42
Application Functions
bizhub 500/420