To Copy In Slightly Reduced Magnification Mode (Minimal) - Konica Minolta bizhub 500 User Manual

Basic Copy Operations
2
Touch [×1.0] to highlight it.
3
Touch [OK].
The Basic Screen will be restored with "×1.000" displayed on the Zoom
key.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Basic
Screen.

To copy in slightly reduced magnification mode (Minimal)

Use this mode to set a slightly reduced magnification ratio in order to prevent
the image loss when copying the original image stretching fully to the edges.
0 The Minimal ratio is set to ×0.930 as factory default.
0 The Minimal ratio setting can be changed within the range from ×0.900
to ×0.999. For details, see "To copy in slightly reduced magnification
mode (Minimal)" on page 3-31.
0 Use the [+] and [–] keys on the Zoom Screen to make a fine adjustment
on the specified magnification ratio. Touch [+] to increase, or [–] to de-
crease the ratio in 0.001 increments.
bizhub 500/420
3
3-31