Stapling Output Copies (Staple); Function Overview - Konica Minolta bizhub 500 User Manual

6
6.3

Stapling Output Copies (Staple)

The following types of machine with a finisher installed can provide Staple
outut mode.
Note
Finisher FS-510 is initially equipped with two exit trays,and one optional
exit tray (OT-601) can be installed. Contact your service representative, if
desired. (Already installed in the above illustration.)

Function overview

The Original Direction setting for the samples below is supposed to be the
one which the top of the original is aligned to the rear side of the machine.
Key
6-10
Sample
Finishing/Folding
bizhub 500/420