Snmp-Server User - TP-Link TL-SG3210 Cli Reference Manual

(authorization and encryption). By default, the Security Level is noAuthNoPriv.
There is no need to configure this in SNMP v1 Mode and SNMP v2c Mode.
read-view —— Select the View to be the Read View. The management access is
restricted to read-only, and changes cannot be made to the assigned SNMP
View.
write-view —— Select the View to be the Write View. The management access is
writing only and changes can be made to the assigned SNMP View. The View
defined both as the Read View and the Write View can be read and modified.
notify-view —— Select the View to be the Notify View. The management station
can receive notification messages of the assigned SNMP view generated by the
switch's SNMP agent.
Command Mode
Global Configuration mode
Example
Add a group, and configure the name as group 1, the Security Model as SNMP
v3, the security level as authNoPriv, the management access to the assigned
View viewDefault as read-write, besides the notification messages sent by View
viewDefault can be received by Management station:
TL-SG3424(config)# snmp-server group group1 smode v3 slev authNoPriv
read viewDefault write viewDefault notify viewDefault
Delete group 1:
TL-SG3424(config)# no snmp-server group group1 smode v3 slev
authNoPriv

snmp-server user

Description
The snmp-server user command is used to add User. To delete the
corresponding User, please use no snmp-server user command. The User in
an SNMP Group can manage the switch via the management station software.
The User and its Group have the same security level and access right.
Syntax
snmp-server user name { local | remote } group-name [ smode { v1 | v2c | v3 }]
[ slev { noAuthNoPriv | authNoPriv | authPriv }] [ cmode { none | MD5 | SHA }]
[ cpwd confirm-pwd ] [ emode { none | DES }] [ epwd encrypt-pwd ]
no snmp-server user name
Parameter
name —— User Name, ranging from 1 to 16 characters.
238