Acl Policy Policy-Add; Acl Policy Action-Add - TP-Link JetStream TL-SL5428E Cli Reference Manual

acl policy policy-add

Description
The acl policy policy-add command is used to add Policy. To delete the
corresponding Policy, please use no acl policy policy-add command. A Policy
is used to control the data packets those match the corresponding ACL rules by
configuring ACLs and actions together for effect. The operations here include
stream mirror, stream condition, QoS Remarking and redirect.
Syntax
acl policy policy-add name
no acl policy policy-add name
Parameter
name —— The Policy Name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Add a Policy named policy1:
TP-LINK(config)# acl policy policy-add policy1

acl policy action-add

Description
The acl policy action-add command is used to add ACLs and create actions
for the policy. To delete the corresponding actions, please use no acl policy
action-add command.
Syntax
acl policy action-add {policy-name} {acl-id} [rate rate] [osd {none | discard}]
[e-port egress-port] [vid vlan-id] [dscp dscp] [pri local-pri] [mirr mirror]
no acl policy action-add {policy-name} {acl-id}
Parameter
policy-name —— The Policy Name, ranging from 1 to 16 characters.
acl-id —— The ACL for configuration in the policy.
rate —— The rate of Stream Condition, ranging from 1 to 1000000 in kbps.
osd —— Out of Band disposal of Stream Condition. It is the disposal way of the
TL-SL5428E JetStream L2 Managed Switch CLI Guide
155