Show Logging Buffer; Show Logging Flash - TP-Link JetStream TL-SL3452 Reference Manual

Example
Display the configuration of the log host 2:
TL-SL3428(config)#show logging loghost 2

show logging buffer

Description
The show logging buffer command is used to display the log information in the
log buffer according to the severity level.
Syntax
show logging buffer [level level]
Parameter
level —— Severity level. There are 8 severity levels marked with values 0-7.
The information of levels with priority not lower than the select level will display.
Display all the log information in the log buffer by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the log information from level 0 to level 5 in the log buffer:
TL-SL3428(config)#show logging buffer level 5

show logging flash

Description
The show logging flash command is used to display the log information in the
log file according to the severity level.
Syntax
show logging flash [level level]
Parameter
level ——Severity level. There are 8 severity levels marked with values 0-7. The
information of levels with priority not lower than the select level will display.
Display all the log information in the log file by default.
TL-SL3428/TL-SL3452
81
JetStream L2 Managed Switch CLI Guide