Table of Contents
Advertisement
3. If installation does not start automatically:
(where
4. Follow the on-screen instructions to complete the installation
process.
During installation, follow these guidelines:
For information about allowing the Desktop Manager software to
overwrite the MultiPASS printer setup options, refer to the "Overwriting
the MultiPASS Printer Options" section.
Overwriting the MultiPASS Printer Options
If you set options on the operation panel of your MultiPASS printer (such
as a phone line type), they are overwritten by the Desktop Manager
software under the following conditions:
When the installation of the Desktop Manager software is completed
2-6 Installing the Desktop Manager Software
On the Windows taskbar, click Start, and then click Run.
If you received your software on a multilingual CD, in the Run
dialog box, type the following command and click OK (where D:
is your disk drive).
D:\SETUP.EXE
If you received your software on a single language CD, in the
Run dialog box, type the following command and click OK
D: is your disk drive).
D:\SETUP\SETUP.EXE
Click Next to move from one dialog box to the next.
Make sure you click Next or OK on the current dialog box.
Be sure to wait for Windows to complete each setup step. If you
hear the computer working, wait until it is done.
Chapter 2
Advertisement
Chapters
Table of Contents
