Setting Up Advanced Receive Fax Options - Canon MultiPASS C80 Software User's Manual

If your computer is turned off:
You set the MultiPASS printer to print the fax or save the fax in its
memory.
If your computer is turned on:
You set the MultiPASS printer to move the fax to the Desktop
Manager on your computer, or to print the fax.
If your device (MultiPASS printer) is not ready:
If you set your MultiPASS printer to print incoming faxes, rather
than to send them to your computer, select how you want to
handle faxes if the MultiPASS printer is not ready (for example, if
the printer is out of paper).
If you choose to receive the faxes into memory, the incoming faxes
are saved until you are able to print them. If you choose to not to
receive faxes, only the first fax that encounters the error is saved.
No subsequent incoming faxes are saved in memory.
It is recommended that you set your system to receive faxes into
memory.
Report Print
You can specify whether or not you want a report to print with each
fax reception, or only when there is an error.
Restoring the Default Settings
If you want to restore the option default settings after making changes,
click Use Defaults.

Setting Up Advanced Receive Fax Options

To change the following Advanced Receive Fax options, click Advanced
on the Receive Fax tab.
Chapter 8 MultiPASS Printer Setup and Other Utilities in the Desktop Manager 8-11