Setting Up Receive Fax Options - Canon MultiPASS L6000 User Manual

Setting Up Receive Fax Options

Paper Size and Reduction
You specify the size of paper in the sheet feeder and whether you want
an incoming fax reduced (approximately 98%) to ensure the contents
fit on the paper on which it is printed.
Answer
You specify the Receive Mode. Initially, you set the Receive Mode
when you installed the Desktop Manager.
You use the Silent Receive option to specify whether the optional
telephone should ring when you receive a call. The type of call for
which the device will ring is determined by the Receive Mode. The
ringing will occur for a fax call only (Fax Only mode), or fax and
telephone calls (FaxTel mode).
You can set the number of rings (1-99) before the MultiPASS will
respond to any call. If the Receive Mode is Fax Only, this is the
number of rings before the MultiPASS answers the call. In FaxTel
mode, this is the number of rings before the MultiPASS answers to
determine if the call is from a fax or a telephone.
Chapter 8 Setup and Other Utilities in the Desktop Manager
8-7