Bin Mailbox Assembly Sensor (Deflector Gate Hp) Removal - Lexmark X651de Service Manual

3. Pinch the tabs securing the sensor (media bin full) to the media tray and remove.

4-bin mailbox assembly sensor (deflector gate HP) removal

1. Remove the 4-bin mailbox assembly left cover. See
page 4-213.
2. Remove the 4-bin mailbox assembly rear door assembly. See
assembly removal" on page
3. Remove the 4-bin mailbox assembly left rear inner cover.
4. Release the tabs securing the sensor (deflector gate HP) and remove the sensor from the 4-bin mailbox
assembly.
5. Disconnect the harness from the sensor (deflector gate HP).
"4-bin mailbox assembly left cover removal" on
4-216.
"4-bin mailbox assembly rear door
Repair information
7462
4-215