Work With Lenses; Select A Channel - Christie D4K2560 User Manual

A value of zero disables the feature.
3. Tap OK.
When the specified number of hours is reached, a Lamp Hours - past expiry warning is issued.

Work with lenses

The lens mount secures the projection lens to the projector and provides setup adjustments to
correct boresight, and control focus, zoom, and offsets.
A Vertical offset knob
B Horizontal offset knob
C
Horizontal boresight bolt
D
Vertical boresight bolt
E Focus bolt
F
Lock/unlock lever
G
Stabilization screw
4. To electronically control the focus, zoom, and offsets, on the touch panel controller, tap the
Lens tab.
Calibrate the lens motors when any of the following conditions are met:
i
• After a lens change.
• After the projector is moved and/or jostled.
• After the lens motor IMCB has been replaced.

Select a channel

The projector uses pre-configured channels to determine how to display images from different
sources. Each channel file contains the optimum processing and display settings for the source.
Channels can be selected through the Home tab on the touch pad controller (TPC).
D4K2560 User Manual
020-101076-04 Rev. 1 (01-2015)
A
C
B
D
Operation
G
F
E
48