Position The Projector - Christie D4K2560 User Manual

ID Item
J Input panel faceplate

Position the projector

Keep the projector lens as perpendicular to the screen as possible, even if significantly above the
i
screen center. When a particularly short throw distance combines with a wide screen, you may have
to forfeit some aim and stay more perpendicular to the screen. In such cases, some lens offset can
reduce the keystone distortion.
1. Position the projector at an appropriate throw distance (projector-to-screen distance) and
vertical position. Ideally, center the projector with the screen. If space is limited, aim the
projector slightly off-center. This increases side keystoning, but reduces the horizontal lens
offset required.
2. If using an optional rack stand (P/N: 108-282101-02), assemble the rack stand using the
instructions provided with the rack stand. Use the hold down clamp (P/N: 116-100101-01)
when securing the projector to the rack stand.
D4K2560 User Manual
020-101076-04 Rev. 1 (01-2015)
Description
Provides a variety of ports for connecting external devices. For information
about connecting devices and inputs, see
90°
Installation and Setup
Connect Devices
≠90°
on page 31.
23