Lamp Expiry Hours; Minimum And Maximum Lamp Power Ratings; Work With Lenses - Christie CP2220 User Manual

Section 5: Operation

5.5.8 Lamp Expiry Hours

This table lists the maximum hours projector lamps can operate before replacement:
Table 5.2 Lamp Expiry Hours
Lamp Type
CDXL-20 (2.0 kW)
CDXL-30 (3.0 kW)
CDXL-30SD (3.0 kW)

5.5.9 Minimum and Maximum Lamp Power Ratings

This table lists the minimum and maximum power settings for projector lamps:
Table 5.3 Minimum and Maximum Lamp Power by Lamp Type
Lamp Type
Other-20
CDXL-20
Other-30 / CXL-30 /
CDXL-30 / CDXL- 30SD
5.6

Work with Lenses

The lens mount secures the primary zoom lens to the projector and provides setup adjustments for correct
boresight, and manually controlled focus, zoom and offsets. See
installation and boresight instructions
The optional Intelligent Lens System (ILS) automates the process of adjusting the focus, offset and zoom in
real-time.
An anamorphic lens (1.25x) can be installed into the optional auxiliary lens mount, then swung into place in
front of the primary lens to widen a "squeezed" image into a properly proportioned "scope" anamorphic
5-4
Replace BEFORE
3500 hours
2500 hours
2000 hours when operating at 2.5 kW
1100 hours when operating at 3.0 kW
Lamp Size Min Lamp Power
2kW 1000W (50%)
2kW 1000W (50%)
3kW 1000W (33%)
Horizontal
Boresight
Bolt
HORIZONTAL
Figure 5-1 Lens Mount
Max Lamp Power
2200W (110%)
2200W (110%)
3000W (100%)*
4.3 Basic Image Alignment
VERTICAL
OFFSET
Anchor Bolt
Zoom Ring
Lock/Unlock
Lens
Focus
Vertical
Boresight
Bolt
for lens
CP2220 User Manual
020-100420-07 Rev.1 (1-2012)