Installing Sfp Modules; Figure 40: Removing The Dust Plug From An Sfp Slot; Figure 41: Installing An Sfp Transceiver - Allied Telesis AT-GS924MX Installation Manual

Installing SFP
To install SFP transceivers in slots 25 and 26 of the 26-port switches or
slots 49 and 50 of the 50-port switches, perform the following procedure:
Modules
1. Remove the dust plug from a transceiver slot on the switch. See
2. Remove the transceiver from its shipping container and store the
3. If you are installing the transceiver in a top slot, position the transceiver
4. Slide the transceiver into the slot until it clicks into place. See
Figure 40.
Figure 40. Removing the Dust Plug from an SFP Slot
packaging material in a safe location.
with the handle on top. If you are installing the transceiver in a bottom
slot, position the transceiver with the handle beneath the module.
Figure 41.
Figure 41. Installing an SFP Transceiver
AT-GS900MX Series Installation Guide for Stand-alone Switches
93