Figure 52: Connecting The Management Cable To The Console Port - Allied Telesis AT-GS924MX Installation Manual

Figure 52. Connecting the Management Cable to the Console Port
2. Connect the other end of the cable to an RS-232 port on a terminal or
PC with a terminal emulator program.
3. Configure the terminal or terminal emulator program as follows:
Baud rate: 9600 bps (The baud rate of the Console Port is

adjustable from 1200 to 115200 bps. The default is 9600 bps.)
Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Note
The port settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulator program.
4. Press Enter.
You are prompted for a user name and password.
5. When prompted for a user name, go to "Disabling VCStack" on
page 106.
AT-GS900MX Series Installation Guide for Stand-alone Switches
105