Figure 33: Switch On A Plywood Base - Allied Telesis AT-GS924MX Installation Manual

AT-GS900MX Series Installation Guide for Stand-alone Switches
Wall Studs
Wall
Plywood Base
Figure 33. Switch on a Plywood Base
The plywood base allows you to mount the switch on two wall studs.
Without the base, only one bracket could be attached to a stud. This is
because the standard distance between two studs in a wall is 41
centimeters (16 inches) while the distances between the two brackets on
the switches are 26.7 centimeters (10 1/2 inches) for the AT-GS948MX
Switch and 31.8 centimeters (12 1/2 inches) for the AT-GS924MPX and
AT-GS948MPX Switches. See Figure 34 on page 80.
79