Figure 19: Installing Brackets On The At-Gs924Mx Switch - Allied Telesis AT-GS924MX Installation Manual

3. Turn the switch over.
4. Attach the two rack mount brackets to the sides of the switch with the
eight bracket screws that come with the unit.
The AT-GS924MX Switch comes with one short bracket and one long
bracket. When installing the device in an equipment rack, Allied Telesis
recommends installing the short bracket on the right side and the long
bracket on the left side, as you face the front of the unit, so that the
stacking ports on the unit align with the same ports on other
AT-GS900MX Series switches in the equipment rack. The possible
positions of the brackets are shown in Figure 19.
Figure 19. Installing Brackets on the AT-GS924MX Switch
The bracket positions for the AT-GS924MPX, AT-GS948MX, and
AT-GS948MPX Switches are shown in Figure 20 on page 64 and
Figure 21 on page 65.
AT-GS900MX Series Installation Guide for Stand-alone Switches
63