Wall Guidelines; Figure 25: Minimum Wall Area Dimensions For The At-Gs924Mx Switch With The Front Panel On The Right - Allied Telesis AT-GS924MX Installation Manual

Chapter 4: Installing the Switch on a Wall

Wall Guidelines

70
Figure 25. Minimum Wall Area Dimensions for the AT-GS924MX Switch
with the Front Panel on the Right
Here are the guidelines to installing the AT-GS924MX Switch on a wall.
You may install the switch on a wall that has wooden studs.

You may install the switch on a concrete wall.

You should not install the switch on a wall that has metal studs.

Metal studs may not be strong enough to safely support the
device.
You should not install the switch only on Sheetrock or a similar

material. Sheetrock is not strong enough to safely support the
device.