Unpacking The Switch; Figure 15: Components Of The Switches - Allied Telesis AT-GS924MX Installation Manual

Unpacking the Switch

All switches, except the AT-GS924MX Switch, come with the components
listed in Figure 15. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors.
Two rack mounting brackets
One regional AC power cord
Eight bracket screws
Two anchors for concrete walls:
Length: 29.6 mm (1 1/8 in.)
Diameter: 6.0 mm (0.25 in)
Two screws for wood or concrete walls:
Length: 31 mm (1 1/4 in.)
Width: 4.3 mm (1/8 in.)
Power cord retaining clip
Figure 15. Components of the Switches
The AT-GS924MX Switch comes with the components shown in Figure 16
on page 56.
AT-GS900MX Series Installation Guide for Stand-alone Switches
55