IBM System x3650 M5 Installation And Service Manual page 411

80030108-1301ffff Sensor [SensorElementName] has asserted. (PS Heavy Load)
Explanation: This message is for the use case when an implementation has detected a Sensor has asserted.
May also be shown as 800301081301ffff or 0x800301081301ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Replace the power supply with higher rated power.
2. Reduce the total power consumption by removing newly added or unused option like drives or adapters.
8003010c-2581ffff Sensor [SensorElementName] has asserted. (Non-Auth DIMMs)
Explanation: This message is for the use case when an implementation has detected a Sensor has asserted.
May also be shown as 8003010c2581ffff or 0x8003010c2581ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Replace as authorized DIMM.
2. Please contact sales representative or IBM/Lenovo support.
8003010f-2101ffff Sensor [SensorElementName] has asserted. (IMM FW Corrupted)
Explanation: This message is for the use case when an implementation has detected a Sensor has asserted.
May also be shown as 8003010f2101ffff or 0x8003010f2101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Reflash primary code.
2.
Disconnect power cord and reconnect.
3. (Trained techinician only)please replace system board if the problem still exist.
80030108-1301ffff • 8003010f-2101ffff
Appendix A. Integrated management module II (IMM2) error messages
395