IBM System x3650 M5 Installation And Service Manual page 178

Figure 87. Optical drive cable latch
Figure 88. Optical drive cable routing
10. Turn on the peripheral devices and the server.
162
System x3650 M5 Type 5462: Installation and Service Guide
Cable connector latch
The following illustration shows cable routing for the optical cable:
Attention: Follow the optical drive cable routing as the illustration shows.
Make sure that the cable is not pinched and does not cover any connectors or
obstruct any components on the system board.
DVD drive cable
6. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page
173).
7. Replace the top cover (see "Replacing the top cover" on page 147).
8. Slide the server into the rack.
9. Reconnect the power cords and any cables that you removed.
Optical drive
connector
2
1
Cable connector latch