IBM System x3650 M5 Installation And Service Manual page 228

Figure 149. Cable cover removal
Figure 150. EIA assembly removal
212
System x3650 M5 Type 5462: Installation and Service Guide
7. To remove the cable cover, angle the cable cover as shown in the following
illustration and slide the cable cover slightly towards the rear side of the
server to remove it from the server.
2
Cable arm cover
8. Grasp the EIA assembly and pull it slightly forward to remove it from the
server.
EIA assembly
9. Position the EIA assembly as shown in the following illustration; then, remove
the assembly out of the server.
1