IBM System x3650 M5 Installation And Service Manual page 717

816f010d-041effff • 816f010f-2201ffff
816f010d-041effff The Drive [StorageVolumeElementName] has been enabled. (Drive 30)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d041effff or 0x816f010d041effff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-041fffff The Drive [StorageVolumeElementName] has been enabled. (Drive 31)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d041fffff or 0x816f010d041fffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010f-2201ffff The System [ComputerSystemElementName] has recovered from a firmware hang. (Firmware
Error)
Explanation: This message is for the use case when an implementation has recovered from a System Firmware
Hang.
May also be shown as 816f010f2201ffff or 0x816f010f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0187
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
701
Appendix A. Integrated management module II (IMM2) error messages