IBM pSeries 690 Service Manual page 547

Error Code Description
4066 0EA0 Scan interface basic assurance tests detected
fault in MOPS service processor code
4066 0EA1 Scan interface basic assurance tests detected
fault in processor subsystem code on main
processor
4066 0EA2 Scan interface basic assurance tests detected
fault in PRD code on service processor
4066 0EA4 Scan interface basic assurance tests detected
fault in service processor code
4066 0EA5 PRD detected a problem in the FNM code
4066 0EAA PRD: FNM is handling this error
4066 0EAF Scan interface basic assurance tests detected
unknown service processor code and system
type
4066 0EB0 Scan interface basic assurance tests detected
JTAG problem
4066 0EB1 Attention line 0 stuck fault
4066 0EB2 Attention line 1 stuck fault
4066 0EB3 Attention line 2 stuck fault
4066 0EB4 Attention line 3 stuck fault
4066 0EB5 Attention line 4 stuck fault
4066 0EB6 Attention line 5 stuck fault
4066 0EB7 Attention line 6 stuck fault
Action/
Possible Failing FRU
1. Access the service processor error log. Find
the error log entry for the 406x 0EA0 error.
Look for a hardware error of the form 450x
yyyy, 460x yyyy, or 4B2x yyyy with a
timestamp within a few minutes of the 406x
0EA0 error. Follow the actions for this
hardware error.
2. If there is no hardware error in the service
processor error log with a timestamp that is
close to the 406x 0EA0 error, or following
the actions for the hardware error does not
resolve the problem, check for platform
firmware updates. If an update is available,
apply it.
3. If a platform firmware update is not
available, or the update does not correct the
problem, call service support.
1. Check for operating system updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Chapter 5. Error Code to FRU Index
527