IBM pSeries 690 Service Manual page 819

Hide thumbs Also See for pSeries 690:

Table of Contents

If the service processor detects no heartbeats during system IPL (for a set period of time), it cycles the

system power to attempt a reboot. The maximum number of retries is set from the service processor

menus. If the fail condition persists, the service processor leaves the machine powered on, logs an error,

and displays menus to the user. If Call-out is enabled, the service processor calls to report the failure and

displays the operating-system surveillance failure code on the operator panel.

Chapter 7. Using the Service Processor

Chapters

Table of Contents