IBM pSeries 690 Service Manual page 967

14. Depress the handle release lever to ensure the locking bar on the handle is pulled into the unlocked
position. Raise the handle on the cassette linkage assembly until it locks into the up position (the
blank filler or adapter moves downward).
15. To install the metal EMC shield on the adapter bracket, grasp the EMC shield as shown in the
following illustration, and do the following:
1 Handle Release Lever
2 Locking Bar
2
1 Metal EMC Shield
2 Installation Location for the Metal EMC Shield
Chapter 9. Removal and Replacement Procedures
1
947