Recording A Received Audio; D Basic Recording; D One-Touch Recording - Icom IC-7800 Instruction Manual

■ Recording a received audio

D Basic recording

[F-2•VOICE]

D One-touch recording

[REC] [EXIT/SET] [F-7•T/R]
[REC]
VOICE RECORDER FUNCTIONS
Up to 20 channels of receive voice memories are
available in the IC-7800. And the total audio length of
up to 209 sec. can be recorded in receive channels.
However, the maximum recordable length into a
channel is 30 sec.
This voice recorder records not only the received
audio, but also the information that the set operating
frequency, mode, and the recording time for your fu-
ture reference as the memory names.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select the desired mode.
e Push [F-2•VOICE] to call up the voice recorder
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory channel (T1–T4) appears,
push [F-7•T/R] to select RX memory channel.
r Push [REC] for 1 sec. to start recording.
• The recording timer counts down.
• The operating frequency, mode and current time are pro-
grammed as the memory names automatically.
t Push [REC] momentarily to stop recording.
IMPORTANT!
Push [REC] to stop recording before, or when
30 sec. has passed from the start of recording.
The voice recorder memory records the 30 sec.
(max.) of audio before [REC] is pushed.
For example, when recording 40 sec. of audio,
the first 10 sec. audio will be over-recorded with
the last 10 sec., so that the total of audio recorded
is 30 sec. only.
When you records a 21st audio, or when the total
audio length exceeds 209 sec., the oldest
recorded audio is automatically erased to make
room for the new audio.
y Push [EXIT/SET] twice to exit the voice recorder
screen.
NOTE: When transmit (or [PTT] is pushed) while
recording, no audio will be recorded.
To record the receiving signal contents immediately,
one-touch voice recording is available.
➥ Push [REC] momentarily to records the previous
15 sec. audio.
• The recordable time period can be set in voice set mode.
(p. 7-9)
7-3
7