Write Text - Aastra DT690 User Manual

16.6

Write Text

When writing text messages and adding/editing or searching for names in the
phonebook, the keys 0 to 9, *, or # can be used.
The first character entered will be an upper level character followed by lower
level characters unless the *-key is pressed before entering the character.
When pressing a key, the first available character on that specific key is
displayed.
To get the following characters, press the key repeatedly. Key 0 and 1 contain
special characters. The marked character is selected after a time-out (3
seconds) or when another key is pressed.
Pressing key 1 adds space between the characters and pressing the *-key
switches between upper and lower case.
(to write Smith):
7 7 7 7 Press for S
6 Press for m.
4 4 4 Press for i.
8 Press for t.
4 4 Press for h.
Example 2
Control keys
While entering a name or a number, you can use the following keys for control
and navigation:
1. Press
2. Press the navigation key
3. Press * twice time to enable a upper case letter, and one time * to get a
1424-EN/LZT 103 090 Uen A1 2008-10-24
To search in the list, enter the first character(s) in the name, press Search.
The name/number is displayed: press Delete, and then Yes to delete the
entry.
to the left to move to the left.
Note: Moves to the beginning of the text if held longer.
Note: Moves to the end of the text if held longer.
number digit
Note: Pressed for more than one second will add a dial tone pause.
to the right to move to the right.
Phonebook
89