Variable Call Forwarding - Aastra DT690 User Manual

17.1

Variable Call Forwarding

Defining a variable call forwarding on a case-by-case basis is carried out within
the framework of your extension's service programming functions.
When your extension is idle:
1. Dial the prefix that corresponds to the desired type of call forward (see list
2. Dial the internal or external number that will be the recipient of your call
3. Press
4. Press
1424-EN/LZT 103 090 Uen A1 2008-10-24
below).
• 6 1 (to activate an immediate call forward).
• 6 2 (to activate a call forward on no-answer condition).
• 6 3 (to activate a call forward on busy condition).
• 6 9 (to activate a call forward on no-answer condition and busy
condition).
• 6 4 (to activate a do not disturb call forwarding).
For the first four cases:
forwards.
As previously indicated, the recipient's number may contain up to 18 digits,
including the network access prefix. An external number may be one that is
accessible through abbreviated dialling.
Note: An external number is composed of the external access 0 prefix
followed by the actual external Directory number.
# To Dial only in case of an external Directory number. Needed to mark the
end of an external Directory number.
For every case:
to confirm.
Wait for the Service Acceptance Tone.
to finish the procedure.
Your extension returns to idle status.
The variable call forward that you have just defined is effective immediately.
Call Forwarding Services
95