Aastra DT690 User Manual page 89

•
•
•
•
Dial 2 to manage a possible external notification for messages left in
your mailboxThis especially applies if your mailbox is managed in recording
or personal assistant mode.
A new menu is therefore played, which prompts you to:
•
•
•
•
•
Dial 4 to manage your user password
Your user password is the some as the one to access your mailbox and activate
or deactivate certain services from your extension. (See Section 20.8 on page
114). By default, it is set to 1234. You may replace it with any other 4-digit code.
Dial 3 to protect your extension from calls sent from an automated
attendant (AA).
If the service was initially inactive, it will be activated, and vice versa.
This is only applicable if your facility is equipped with an automated attendant
that enables the general directing of calls to be managed in lieu of your facility's
attendants. In this case, you may usually be contacted through this automated
attendant. This service is to prevent any calls from being presented on your
extension by the automated attendant. An internal or external calling party
trying to contact you through the automated attendant is then automatically
directed to your mailbox.
1424-EN/LZT 103 090 Uen A1 2008-10-24
Dial 1 to hear the number currently saved for your personal assistant. This
information is played back for you through voice synthesis, one digit at a
time
Dial the sequence: 2 < #to save your personal assistant's number>. It
may consist of an internal or external number, containing up to 18 digits,
including the external network access prefix.
Dial 4 to erase the number currently saved for your personal assistant. It is
then replaced by a number for a facility attendant.
Dial 9 to return to the main mailbox personalization menu.
Dial 1 to hear the number currently saved for external notification. This
information is played back for you through voice synthesis, one digit at
a time.
Dial the 2 # sequence: to save your external notification recipient number.
It may contain up to 18 digits, including the network access prefix.
Dial 3 to activate or de-activate the external notification service. If
the service was initially inactive, it will be activated, and vice versa.
Deactivating the service has no impact on the recipient number for the
service that is reputed and remains programmed.
Dial 4 to erase the number currently saved for external notification.
Dial 9 to return to the main mailbox personalization menu.
Voice Mail Services
81