Chargers - Aastra DT690 User Manual

23.5

Chargers

23.5.1 Desktop Charger
There are two desktop chargers available, one basic and one advanced, see
Figure 15 on page 127.
Basic
Advanced
Figure 15
The desktop charger is delivered with a plug-in power supply and is connected
into an ordinary wall socket.
Note: Only use the chargers within the temperature range of 5 - 40º C.
Advanced desktop charger
To use the advanced desktop charger for software download and synchronizing
parameters, the charger must be connected to a PC with Portable Device
Manager (PDM) software installed. For a description of PDM, see Section
23.10 on page 133.
The charger is connected to a PC through the USB or one of the network
connectors, see Figure 16 on page 127. When connecting the charger with a
PC through one of the network connectors the charger acts as a switch, which
makes it possible to connect the other connector to the LAN.
Figure 16
Note: Network and USB connectors are used to connect the desktop charger
1424-EN/LZT 103 090 Uen A1 2008-10-24
Charging only
Charging, software download, and synchronizing of
parameters.
Advanced
Desktop chargers
Network and USB Connectors
to a PC running the PDM (not for charging).
Basic
Installation
127